.jpg)
Configuration
The building size is 700′ long x 70’ wide x 31′ crane hook height.
| Major Equipment | |
| 1 Ea. | 34′ x 170′ Flame Planer |
| 5 Ea. | Plate Rolls |
| Max. Wall | Max. Length | Min. ID | |
| No. 44 Bertsch | 10 in. | 150 in. | 32 |
| No. 36 Bertsch | 5-6 in. | 125 in. | 28 |
| No. 30 Bertsch | 1-2 in. | 126 in. | 21 |
| No. 18 Bertsch | 0.75-1.25 in. | 120 in. | 13 |
| VRM-HY 12×12 Hausler | 1.0-1.25 in. | 145 in. | 29 |
| Welding Stations and Cranes | |
| 6 Ea. | Tandem Arc car carriage type longitudinal welding stations complete with Lincoln Power Wave Welding Equipment |
| 2 Ea. | Triple Arc “Ransome” welding stations (25-ton) carriage complete with Lincoln Power Wave Welding Equipment |
| 1 Ea. | Ransome Make-Up Station with internal line up clamp capability to 60-tons at 50-ft lengths |
| 1 Ea. | Ransome 20 ton Make-Up Station up to 40 ft. lengths |
| 2 Ea. | Inside Diameter Girth Welding Station (32′ long) complete with Welding Equipment |
| 1 Ea. | Ransome Outside Girth Welding Stations capable of welding 10-ft. diameter by 50-ft. length complete with Boom mounted, Lincoln Power Wave Welding Equipment with four (4) each Tandem Arc Heads |
| 1 Ea. | Ransome outside Girth Welding Station capable of welding 7-ft diameter X 40-ft. lengths complete with boom mounted Lincoln Welding equipment including (3) three Tandem Submerged Arc head |
| 2 Ea. | 30-ton Bridge Cranes |
| 1 Ea. | 60-ton Bridge Crane with two (2) each 30-ton Trolleys |
| 2 Ea. | 10-ton Bridge Cranes |
Roll Out/Make Up Rack
Configuration
The building size is 450′ long x 70′ wide x 29′ crane hook height.
| Major Equipment | |
| 1 Ea. | 60-ton Overhead Crane |
| 70′ Span | 70′ Span |
| Maximum Hook Height: 28′-11″ | Maximum Hook Height: 28′-11″ |
| 1 Ea. | 60/10-ton Double Hoist Crane |
| 70′ Span | 70′ Span |
| Maximum Hook Height: 28′-11″ | Maximum Hook Height: 28′-11″ |
| 1 Ea. | 150-ton Welding Line, complete with Ransome Turning Rolls, three (3) manipulator carts with three (3) Lincoln tandem Sub Arc welding machines for lengths up to 280’ and diameters to 120” |
| 1 Ea. | Back Welder Line 150-ton Capacity with Ransome Turning Rolls equipped with Preston-Eastin Air Powered Inside Back welder with 1500 AMP Lincoln Sub Arc welding machines for lengths up to 280’ and diameters to 120” |
| 1 Ea. | Make-up rack 60-ton capacity with Ransome Turning rolls for make-up to 280’ |
Related Services
Ready to get started?
713-450-8959